Location: [[Welcome_to_the_Factur_Laser_Lab_Wiki!|Laser Lab]][[File:Epilog_Fusion_13000_Laser_Cutter.jpg|200px|thumb|right|Epilog Fusion 13000 Laser]]
 
Location: [[Welcome_to_the_Factur_Laser_Lab_Wiki!|Laser Lab]][[File:Epilog_Fusion_13000_Laser_Cutter.jpg|200px|thumb|right|Epilog Fusion 13000 Laser]]
 +
The epilog 13000 laser is a 75 watt CO2 laser that can cut and engrave.  It has a 40" X 28" working area and can handle objects up to 13.25" high.
    
=Policies for the Epilog Fusion 13000 Laser=
 
=Policies for the Epilog Fusion 13000 Laser=
 
*[http://support.epiloglaser.com/article/8205/42831/ 1.5", 2.0" or 4.0" Which lens should I use?]
 
*[http://support.epiloglaser.com/article/8205/42831/ 1.5", 2.0" or 4.0" Which lens should I use?]
 
*[http://www.epiloglaser.com/assets/downloads/driver-instructions/job-manager-instructions.pdf Job Manager Instructions]
 
*[http://www.epiloglaser.com/assets/downloads/driver-instructions/job-manager-instructions.pdf Job Manager Instructions]
Exception encountered, of type "Error"