Difference between revisions of "Welcome to the Factur Wood Turning Studio WiKi!"
Line 4: | Line 4: | ||
=General Policies for the Woodturning Studio= | =General Policies for the Woodturning Studio= | ||
+ | [Roger@Factur.slack.com Contact Roger] | ||
'''YOU MUST BE APPROVED AND CERTIFIED BY THE STUDIO MANAGER BEFORE YOU CAN USE ANY EQUIPMENT IN THE WOODTURNING STUDIO. NO EXCEPTIONS! NAMES OF APPROVED MEMBERS WILL BE LISTED ON THE SIGN-IN BOARD | '''YOU MUST BE APPROVED AND CERTIFIED BY THE STUDIO MANAGER BEFORE YOU CAN USE ANY EQUIPMENT IN THE WOODTURNING STUDIO. NO EXCEPTIONS! NAMES OF APPROVED MEMBERS WILL BE LISTED ON THE SIGN-IN BOARD |
Revision as of 20:06, 14 May 2017
Roger Scott teaches hands on wood turning in Factur's Wood Turning Studio. Classes can be scheduled on Eventbrite. For information please contact Roger from his Contact Page at www.WoodPops.com
Contents
General Policies for the Woodturning Studio
[Roger@Factur.slack.com Contact Roger]
YOU MUST BE APPROVED AND CERTIFIED BY THE STUDIO MANAGER BEFORE YOU CAN USE ANY EQUIPMENT IN THE WOODTURNING STUDIO. NO EXCEPTIONS! NAMES OF APPROVED MEMBERS WILL BE LISTED ON THE SIGN-IN BOARD
SAFETY FIRST - Do not use any equipment if you are under the influence of drugs or drink. Wear eye & face protection whenever the lathe is turned on. Closed-toe shoes are required in the studio. Do not wear loose or baggy clothing around the lathe when it is turned on. Make sure you or anyone else is not in "THE LINE OF FIRE" when turning on the lathe. Do not put paint rags in the trash can. Take them to the dumpster. Store all flammable finishes in the studio paint locker.
CLEANLINESS SECOND - Before beginning your work turn on the overhead dust collection. Do not sand your project without direct dust collection at your lathe. When finished working, vacuum and sweep around your work area. If the floor is dusty run the dust mop over it. Put your project and tools away. Do not leave them on the community work benches. Empty the trash can if it is full. Do not clean paint brushes in our bathroom. There is a slop sink out back for that purpose. Help keep our bathroom clean.
LEAVING PROCEDURE - Turn off both air conditioners and the fan. Turn off the air compressor. Turn off the computer monitor. Lock up your personal tools. Sign out on the check in clip board. Turn off the overhead lights. Close the door behind you.
GENERAL PROCEDURE - Use the check in clipboard to sign in and out of the studio. Respect other members' property. Do not use their tools or supplies without their permission. Give your work undivided attention. Looking around, carrying on a conversation and “horseplay” are careless acts that can result in serious injury. The studio is available 24/7 for your enjoyment.
Equipment
- Iwata Revolution CR Airbrush
- Jet DC-650M Dust Collector
- Nova Galaxi DVR 1644 Lathe with a Oneway Brand Vacuum Chuck
- Nova DVR XP 1624 Lathe
- Powertec Air Filtration System
- Ridgid 14500 Shop Vac
- Rikon 70-100 12" x 16" Mini Lathe
- Rikon 8" Bench Grinder
Location
Insert high lighted map of Factur
Consumables
Routine Maintenance Schedule
- Monthly: All Three Lathes
- 6 Months: All Three Lathes